Dual Mode Bicycle Speed Cadence Sensor SDM-3102
- Model Number:SDM-3102
- Battery life:6 month
- Warranty time:12 months
Tracking cycling speed
Measuring cycling distance
Record cycling cadence
Work with IOS(6.0 and above) device
Support bluetooth 4.0 and ANT
Application: Wahoo fitness Strava MapMy Ride
How to Install the Dual Mode Bicycle Speed Cadence Sensor
Put the EVA mounting base on the bottom of Then place the sensor on the rear chain stay of your bike, near the pedal. Secure the sensor in place with the provided zip-ties.
Install the cadence magnet on the crank. Align so that the magnet will pass by the indicator line on the cadence sensor. The magnet will have to pass within 3/8” (10 mm) to get a reading. Adjust the position of the sensor and/or magnet if required. Secure the magnet with 2 zip- Tighten and snip the ends of the zip-ties.
Unscrew the spoke magnet. Place it on any spoke on the back wheel, facing in towards the speed sensor. Align so that the magnet will pass by the indicator line of the speed sensor. The magnet will have to pass within 3/8” (10 mm) to get a reading. Once again, adjust the position of the sensor and/or magnet if required. Screw and tighten the magnet in place on the spoke.
Open the app. Start cycling now. You will see real-time cadence and speed on the app.